Perfect for those who like large, dense clouds, the Armour GS is The latest DTL kit by Vaporesso, offering advanced features and sub-ohm capabilities. It has a removeable 18650 battery (sold separately) allowing you to take multiple pre charged batteries out with you on the go so that you never run out of juice. If you’d prefer a similar kit with a pre built in battery, the Vaporesso Armour G has you covered.

High Wattage And Coil Compatibility

The Armour GS wattage is fully customisable between 5W and 80W depending on the coil you’re using, supported by NEO pulse output technology for consistent vapour production. The Armour G uses the Vaporesso GTX coils, available in the following resistances and compatible with the following wattages:

0.15Ω 60-75W, Best 70W
0.2Ω 45-60W, Best 55W
0.3Ω 32-45W, Best 40W
0.4Ω 26-32W, Best 30W
0.6Ω FeCrAl 20W-30W, Best 28W
0.8Ω FeCrAl 12W-20W, Best 18W
1.2Ω 7-11W, Best 11W

The GTX coils are compatible with the Armour G pods available in a 5ml e-liquid capacity. The Armour G pods have a transparent e-liquid chamber and a handy anti leak top fill system.

The pods also have an innovative top airflow system with a 4 level airflow adjuster for further customisation.

What Is ‘Ohms’?

Ohms relates to the resistance of the coil. Anything under 1 ohm is classed as ‘sub ohm’ and should be used with e-liquids that have a VG ratio of 60VG or above. Anything 1 ohms or above can be used with 50/50 liquids and other high PG liquids such as nic salts.

The higher the ohm the stronger the throat hit, less vapour will be produced, and the coil will last longer before it needs to be changed.

The lower the ohm the more intense the flavour and the larger the clouds, however the coil will not last as long.

Multiple Modes Available

Smart Mode: This will recognise the ohm of the coil inside your pod and will automatically select the ideal output.

Pulse Mode: This will improve the flavour of your vape, also allowing you to fine tune the wattage.

Eco Mode: This will conserve the battery of the Armour GS by lowering the output power.

LED Screen And Customisable Themes

The Armour GS has a customisable interface displayed on it’s crisp 0.96″ TFT colour screen allowing you to make changes easily and quickly adjust settings. All powered by an upgraded AXON chip, you can change the screen animations via the devices settings for a custom display with lively graphics. Choose from 3 different themes.

On the homepage of the display screen, you can view your battery level, graphic choice, coil resistance, puff count and wattage. You can also view the lock/unlocked status. Lock and unlock the device by sliding the switch under the screen from left to right to prevent any misfiring.