Innokin Endura T20S Kit : A How to Guide

Innokin Endura T20s Vape Kit

The Innokin Endura T20-S Kit is a starter kit designed for mouth-to-lung vaping. It features a one-button design, a 1500mAh battery, and a 2ml tank. The kit includes two 0.8ohm coils with single button operation.

The Innokin Endura t20 s takes the complexity away from vaping, with one single button to control the device. Because of this, it makes a great starter kit for someone looking to quit smoking, and start vaping.

A quick look at the parts of your new starter kit:

 

Let’s dive straight in. Your new T20s vape kit has just arrived, where do we go from here?

Instructions for Use:

1. Fill the tank with e-liquid. Wait five minutes before vaping.
2. Click the button  three times to power on the device.
3. Hold the button to activate the device and vape.

How To fill your Innokin Endura T20s Vape Kit:

1. Remove/unscrew drip tip from the Tank.
2. Fill your E-liquid in the space around the coils (bit in the middle of the Tank)
3. Be Sure not to overfill, this could get messy and cause the Innokin Endura T20s to Leak.
4. Screw Drip tip back on to the tank. Leave for 5 minutes to let the new coils to absorb the E-liquid.
5. You’re good to go!

 

 

 

To give a clearer a view of where to put the E-liquid in the tank, check out this photo below and you can see the gap around the outside where to put your liquid/Nic Salt.

How to Change the Innokin Prism S Coil and how long does the coils last?

Your Innokin Endura t20s will come with 2 0.8ohm Prism S coils. To change the coils.

1. Make sure there is no e-liquid in the tank before you pull out the coil.
2.  Hold the tank with the threading up.
3. Unscrew the bottom metal cap of the tank
4. Hold the coil and gently pull to remove.
5. Carefully and safely dispose of the used coil. Keep away from children and pets.
6. Properly align the flat sides of the new coil.
7. Push to fully insert the new coil firmly into tank.
8. Ensure that the coil is completely inserted. 8) Carefully and firmly tighten the bottom cap.

How long do the Prism S Coils last?

The Prism S Coils lifespan will obviously depend on level of use. However we’d expect the average coil life to be between 1 and 2 weeks.

Here are some top tips to increase your coils life span:

• Don’t vape the Tank empty, always make sure you have some E-liquid in there otherwise the coil will burn out faster.
• Take 3-5 seconds between hits.
• Make sure to prime coils, try to dab the exposed cotton with E-liquid when using a coil for the first time. Then wait atleast 5 minutes before vaping!