Vaporesso Xros Pro Vape Kit

The Vaporesso Xros Pro is the perfect device for beginner vapers and those looking to switch from disposables to a refillable device. A new and upgraded of the hugely successful Xros series, Vaporesso bring you the latest version. Powered by a built-in 1200mAh battery, the Xros Pro will comfortably give you all day vaping. Recharge the device fully in just 35 minutes thanks to USB C fast charging (cable included). The Xros pro also features Axon super pulse mode, which ensures a powerful output even when the device is low on battery.

The Xros Pro has a wattage range of 5-30 Watts, which can be increased in 0.5W increments when the 0.4ohms pod is in use.

Button Operation

The Xros Pro has a fire button on the front of the device which can be used to navigate through the kits operation system.

2 Clicks: For the RGB light
3 Clicks: To adjust the wattage/Modes
4 Clicks: To reset the puff counter to 0

Side Locking Safety Feature

The Xros Pro has a slide-lock button on the side of the device that allows you to lock the fire button. This will prevent any misfiring when the kit is in transit, but does not turn off the auto draw function. To activate this, slide the button upwards, and to unlock, slide it downwards.

The Xros Pro comes with an adjustable airflow, to customise your vaping experience – closed for less vapour and open for more. Using the device couldn’t be simpler, with both auto draw (like a disposable) and button activation available. You can also handily lock the device to only auto-draw mode so the kit doesn’t fire in a pocket or bag. Open the airflow all the way for an RDTL vaping style (RDL when using the 0.4ohms pods), and close it fully for a tight MTL draw. If you are using the 0.4Ohms pods, make sure to not use these with 50/50 nic salts as it can cause leaking. Opt for a 0.8ohms or above coil for the best compatibility with 50/50 nic salts such as the Elfliqs and Bar Juice.

The Xros pro is the first pod device on the market to offer a top filling 0.4ohms pod, each kit comes with 2 of these Vaporesso Xros 0.4Ohm mesh pods with the coil pre-installed. These pods have a 2ml e-liquid capacity, and are perfect for Nic Salt e-liquid with a 50VG/50PG ratio. The Xros Corex pods are also completely refillable and have a leak-proof design.

The display screen on the Xros Pro is now tailored to the pod you’re using. When you have one of the 0.4ohms pods inserted, the screen will display the wattage level, puff count, and battery level, and with any other pods it will show the 3 available modes.

Xros Corex Coil Technology

The Corex pods have a new and improved heat distribution system allowing for a fuller flavour, paired with the upgraded cottons increased absorbency that ensures the cotton stays evenly saturated even when you’re running low on liquid. This helps to prevent coil burnout and extend the life of your pod. This even heating and higher cotton absorbency means that the coil should last up to 50% longer than the original Xros pods!

The Xros Corex pods are also anti leak, with a handy top cap and top filling system that keeps the liquid where it’s meant to be. You can choose from coils ranging between 0.4ohms to 1.2ohms to fully customise your vaping experience.

Xros Pod Resistances And Compatible Wattages

• 0.4Ω – Best: 25w
• 0.6Ω – Best: 21w
• 0.8Ω – Best: 16w
• 1.0Ω – Best: 12w
• 1.2Ω – Best: 10w

All You Need To Know: 

• 1200mAh Built-in battery
• Mouth-to-lung (MTL) device
• AXON Chipset
• Super Pulse Mode
• Top Filling Leak Proof Design Pods
• Adjustable Airflow
• 2ml e-liquid Capacity
• Mesh Coil For Increased Flavour
• Variable Wattage
• Autodraw Plus Button Activated

Compatible Pods: 

• Vaporesso Xros Replacement Pods

Available Colours:

• Black
• Silver
• Blue
• Red
• Green
• Orange
• Pink

Box Comes With:

• 1 x Vaporesso XROS Pro Battery
• 1 x Vaporesso XROS 0.4Ω Mesh Pod (Pre Installed)
• 1 x Vaporesso XROS 0.4Ω Mesh Pod (Spare)
• USB Type-C Cable
• 1 X User Manual & Warranty Card

                     Explore the Vaporesso Xros Pro Kit: